Location:Home > News
News
SS Pleated Sintered Metal Fiber Felt Filter Element

Source:http://www.zwenfilter.com/news/1679.html    Time:2023-04-12    Hits:12

ZWEN------Backwash_Sintered_Filter_Leader

SS_Pleated_Sintered_Metal_Fiber_Felt_Filter_Element.jpg


SS Pleated Sintered Metal Fiber Felt Filter Element Technical Parameter

Raw Material: SS 316L, SS 304

Filter Media: ZWEN Sintered Fiber Felt

Filter Rating Range: 1 Micron ~ 100 Microns

Filter Efficiency: > 99.99 %

Operation Temperature:  816 

Outside Diameter: 30 mm, 40 mm, 50 mm, 60 mm, 63.5 mm, 65 mm, 70 mm, 80 mm, 

                             100 mm, 110 mm, 150 mm, 300 mm, 400 mm or others

Length: 10'' (254 mm), 20'' (508 mm), 30'' (762 mm), 40'' (1016 mm) or others

Gasket: PTFE, Viton, Silicone, Buna-n, EPDM

Connector/Fitting/Adaptor:

1. DOE

2. Code 2 (226+Flat End)

3. Code 3 (222+Flat End)

4. Code 7 (226+Fin End)

5. Code 8 (222+Fin End)

6. Thread (NPT,BSP,G,M,R)

7. Flange

8. Special customization


SS Pleated Sintered Metal Fiber Felt Filter Element Feature

1. SS pleated sintered metal fiber felt filter element has large filter area

2. SS pleated sintered metal fiber felt filter element has high dirt holding capacity 

3. SS pleated sintered metal fiber felt filter element has high porosity

4. High filter efficiency 

5. High mechanical strength

6. High temperature resistance

7. High corrosion resistance

8. Washable and Cleanable

9. Long service life


Application

Polymers filtration, high temperature liquid filtration, high viscosity liquid filtration, high temperature gases filtration, steam filtration, catalysts filtration, solvents filtration, fuel filtration, lubricant oil filtration, ink filtration, water filtration, beverages filtration, resin filtration, detergent filtration


ZWEN Quality Guarantee

1. We can provide raw material test report

2. We can provide filter efficiency test report

3. We will pay 2 times price for clients if SGS test report shows bad quality (we only accept SGS test report)


About Us

XINXIANG ZWEN FILTER CO.,LTD produces ss pleated sintered metal fiber felt filter element, ss pleated sintered metal wire cloth filter element, and ss pleated sintered metal wire mesh filter element.


XINXIANG ZWEN FILTER CO.,LTD has advanced sintering equipment, advanced welding equipment and a high level of skilled workers.


XINXIANG ZWEN FILTER CO.,LTD has passed ISO 9001:2008 quality management system and SGS audit test. 


XINXIANG ZWEN FILTER CO.,LTD main markets are European market and North American market.


XINXIANG ZWEN FILTER CO.,LTD Key Clients: 3M, BOEING, GKN, MAHLE, Parker, SIEMENS.


Contact Us

XINXIANG ZWEN FILTER CO.,LTD

FACTORY ADDRESS: NO.425, XINHUI ROAD, MUYE DISTRICT, XINXIANG CITY, HENAN PROVINCE, CHINA

TEL: +86-373-5807218

EMAIL: info@zwenfilter.com

ENGLISH WEBSITE: www.zwenfilter.com

ENGLISH WEBSITE: www.leerfilter.com

CHINESE WEBSITE: www.zwenfilters.com