Sintered Powder Filter Technical Data

Raw Material: SS 316L,Titanium

Filter Rating Range: 0.22 Micron ~ 100 Microns

Operation Temperature: ≤ 816 ℃

Outside Diameter: 12 mm, 25 mm, 30 mm, 50 mm, 60 mm, 65 mm, 70 mm, 80 mm, 90 mm, 100 mm

Length: 5'' (127 mm), 10'' (254 mm), 20'' (508 mm), 30'' (762 mm), 40'' (1016 mm) or others

Gasket: PTFE, Viton, Silicone, Buna-n, EPDM

Connector/Fitting/Adaptor:

1. DOE

2. Code 2 (226+Flat End)

3. Code 3 (222+Flat End)

4. Code 7 (226+Fin End)

5. Code 8 (222+Fin End)

6. Thread (NPT,BSP,G,M,R)

7. Flange

8. Special customization

Sintered Powder Filter Feature

1. Sintered powder filter is made from stainless steel powder particle or titanium powder particle

2. Sintered powder filter is sintered in a high temperature vacuum furnace

3. Sintered powder filter is depth filtration

4. Sintered powder filter is backwash

5. High porosity

6. High mechanical strength

7. High filter efficiency

8. High dirt holding capacity

9. High flow rate at low differential pressure

10. High temperature resistance

11. High corrosion resistance

12. Washable and Cleanable

13. Reusable

14. Long service life

Application

1. Steam filtration (aseptic package, breweries, chemicals, dairies, electronics, food and beverage, pharmaceuticals, plastic)

2. High temperature gases filtration (highly aggressive gases, nitrogen, carbon dioxide, compressed air, tank ventilation)

3. High temperature liquid filtration (chemicals, cosmetics, paints, salt and seawater, syrups, coolants, food and beverage, pharmaceuticals, solvents, water)

4. Catalysts powders recovery

5. Precoat support filtration

ZWEN Quality Guarantee

1. We can provide raw material test report

2. We can provide filter efficiency test report

3. We will pay 2 times price for clients if SGS test report shows bad quality (we only accept SGS test report)

About Us

XINXIANG ZWEN FILTER CO.,LTD produces sintered mesh filter, sintered metal filter, sintered porous filter, sintered powder filter, sintered ss filter, and sintered ti filter.

XINXIANG ZWEN FILTER CO.,LTD has advanced sintering equipment, advanced welding equipment and a high level of skilled workers.

XINXIANG ZWEN FILTER CO.,LTD has passed ISO 9001:2008 quality management system and SGS audit test. 

XINXIANG ZWEN FILTER CO.,LTD main markets are European market and North American market.

XINXIANG ZWEN FILTER CO.,LTD Key Clients: 3M, BOEING, GKN, MAHLE, Parker, SIEMENS.

Contact Us

XINXIANG ZWEN FILTER CO.,LTD

HEAD OFFICE: NO.728, 7TH FLOOR, JINGYE INTERNATIONAL, NORTHEAST CORNER, INTERSECTION OF JINSUI AVENUE AND XINER STREET, HONGQI DISTRICT, XINXIANG CITY, HENAN PROVINCE, CHINA

FACTORY ADDRESS: NO.425, XINHUI ROAD, MUYE DISTRICT, XINXIANG CITY, HENAN PROVINCE, CHINA

TEL: +86-373-5807218

FAX: +86-373-5895995

EMAIL: info@zwenfilter.com

WEBSITE: www.zwenfilter.com

WEBSITE: www.leerfilter.com             

WEBSITE: www.ti-frit.com

WEBSITE: www.ti-filter.com

WEBSITE: www.titanium-frit.com

WEBSITE: www.titanium-filter.com

WEBSITE: www.metal-sintered-filter.com

WEBSITE: www.sintered-porous-filter.com

WEBSITE: www.pleated-stainless-steel-filter-element.com

WEBSITE: www.pleated-stainless-steel-filter-cartridge.com